Adding Face Details To Your Needle Felted Animals

One of the trickiest things to do when creating face details is getting the really fine lines for the mouth and nose. It’s something I always spend time on with my workshop students so they don’t feel disappointed with the finishing touches. Practice, practice practice is the answer, a firm base on which to work, and less is more when it comes to the wool. When I say less is more, think even less than that. You only need the tiniest strand of wool to create really impactful details, add in a few simple techniques and you will soon be adding those details with confidence.

Top Tip: If it doesn’t look right don’t try and rectify it. Pull the wool off and start again. I often do this and it takes much less time than trying to fix the problem. Also, preparation is key so make sure the head is firm before starting. If the head is soft and squidgy you aren’t going to get the nice straight lines you want to achieve and your sheep or animal will look like they’ve been on the sauce.

Whatever your design, this technique can be applied to your project in many different ways.

Let’s get started and, if you haven’t made your head yet just click the link for the video tutorial: HOW TO CREATE A BASIC HEAD SHAPE

1 Create an impression of the mouth – Do this by ‘drawing’ the mouth onto the face with your felting needle. ‘Draw’ a V for the nose, a line down the centre and two shallow curves each side. Go over the lines you have drawn until they are clearly visible and defined. This is where your wool is going to sit and makes it so much easier to maintain a nice, even shape.

2 Roll a very, very thin wisp of wool between your fingers to gently mat it together (not vital but it helps). If you don’t think it is thick enough you can go over it again later. However, start with too much and it ends up looking like you have drawn it on with a felt tip. Place it on the top left of the V shape you have created and gently tack it down towards the bottom of the V shape. Top Tip: Make sure the wool is at least twice the length you need as it will be pulled into the face as you felt; you can trim it later.

3 Continue back up the V shape and leave the ends loose.

4 Use another thin strand of wool (longer than you will need) to create the line down the centre. Top Tip: Keep the wool taught with your free hand. This will help create a straight, even line and avoid a drunken grin.

5 Leave all the strands loose until you have completed the mouth.

6 As before, use a very thin strand of wool and felt along the mouth. Repeat for the other side.

Top Tip: Don’t be precious over the shape of the curve as this can be teased into shape before you finish.

7 Make sure the wool is secure before trimming and shape the mouth by gently rubbing the tip of you finger on the wool – in the centre – to pull it down slightly.

8 Your head is now ready for the eyes and that’s another easy tutorial. You can watch it Here or keep scrolling for the written tutorial.

Top Tip: Sometimes the mouth can look a little off centre or lopsided. This is easily fixed by squeezing, and moving the head in your fingers – wool is still quite pliable, even when felted – until the features straighten out.

Create fabulous features for all your needle felted creations

How to sew eyes onto your needle felted animal

Needle felted eyes look great but I also love the sparkle and shine you get from a glass bead. I always find it funny that, when some of my students have spent hours creating their needle felted animal, they say they find sewing on the eyes the hardest part. I think it is because they seem a little bit fiddly but here is a quick way of doing it, in five minutes and four easy steps.

1 Use black thread and needle and sew through the side of the face – where your eyes will sit – and repeat a few times until your thread is secure.

2 Pop your bead onto the tip of your needle and pull it through.

3 Push your needle back through to the other side and pop on your second bead.

4 Repeat the process a few times until you can pull quite firmly on your thread, and both beads are secure. Finish by sewing through the back of the head a and cut the thread.

3 thoughts on “Adding Face Details To Your Needle Felted Animals

    • Lincolnshire Fenn Crafts

      Thanks Holly. A size 38 works well and is a good all rounder but a 40 is best if you are creating a lot of delicate surface detail. Use needles at a diagonal angle on the surface and you won’t see any needle marks. Happy felting 🙂

Leave a Reply to HollyCancel reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.